|
|
|
APC BACK-UPS CS 650VA 230V |
|
| Product name : APC BACK-UPS CS 650VA 230V |
Item : APC BACK-UPS CS 650VA 230V |
Output Power Capacity
400 Watts / 650 VA
Max Configurable Power
400 Watts / 650 VA
Nominal Output Voltage
230V
Output Connections
| (1) IEC 320 C13 (Surge Protection) |
 |
| (3) IEC 320 C13 (Battery Backup) |
|
Nominal Input Voltage
230V
Input Frequency
50/60 Hz +/- 3 Hz (auto sensing)
Input voltage range for main operations
180 - 260V
Input voltage adjustable range for mains operation
160 - 282V
Battery Type
Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
Typical recharge time
8 hour(s)
Hover over the line on the graph above to view the runtime at any desired load
Curve fit to measured runtime data. All measurements taken with new, fully charged batteries, at typical environmental conditions, with no electrical input and balanced resistive load (PF = 1.0) output.
Communications & Management
Control panel
LED status display with On Line : On Battery : Replace Battery and Overload indicators
Audible Alarm
Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm
Surge Protection and Filtering
Surge energy rating
320 Joules
Data Line Protection
Analog phone line for phone/fax/modem/DSL (RJ-45 connector)
Shipping Height
494.00 mm
Master Carton Weight
16.09 lbs.
SCC Codes
1073130422443 0
Operating Environment
0 - 40 °C
Operating Relative Humidity
5 - 95%
Operating Elevation
0-9000 meters
Storage Temperature
-15 - 45 °C
Storage Relative Humidity
5 - 95%
Storage Elevation
0-4500 meters
Audible noise at 1 meter from surface of unit
45.00 dBA
Online Thermal Dissipation
0.00 BTU/hr
Regulatory Approvals
A-tick,C-tick,CE,GOST,NEMKO
Standard Warranty
2 years repair or replace
**The time to recharge to 90% of full battery capacity following a discharge to shutdown using a load rated for 1/2 the full load rating of the UPS.
|
|
[Next : APC 650(BR650CI-AS)]→
|
|
lineinterative UPS
